Dust Deputy DIY Anti-Static Retrofit Cyclone Separator for Wet/Dry Shop Vacuums (DD DIY)

Dust Deputy DIY Anti-Static Retrofit Cyclone Separator for Wet/Dry Shop Vacuums (DD DIY)

Q: anybody put this on 30 gallon steel buckets? the galvanized ones for storing animal food and such?

Similar. 45 gallon fiber drum. 6 hp shop vac. Works like a charm.

Q: Is the flange at the base a standard size with a standard bolt pattern? If not, could I get the ID and OD dimensions?

Sorry I was slow to get back to you, been out of town. It is a 6 bolt configuration. Bolts I used were 5/16". From bolt to bolt is about 2 1/8". Straight across from outer bolt to outer bolt is 4 1/4". Inside diameter of Cyclone is 3" opening. Whether this is a standard flange I really don't know. You might check standard flange sizes somewhere on internet. Hope this helps.

Q: Will this work for wet pickup? Will it separate water from the airflow using a high-flow (approximately 210 CFM) shop vac?

Yes, water spray is denser than air material, and ANY such material will get separated in a vortex collector. You can put a special foam filter on your shop vacuum interior - the companies make these for wet pickup. This prevents crap from getting into motor intake. If you look at inlet port up inside where the interior of the shop vacuum filter covers, you can clean out leaves and debris there with a screw driver. But much better to not let it get in there at all, since the motor is not made to disassemble and clean. (It should be.)

Q: What is the size of the entry and exit ports?

For my aplication -a sears 2 1/4 inch vac hose to both ports--go to a hardware in the plumbing and get 2 fernco 1 1/2'' x 2'' rubber adaptor---these measurements are deceiving because pvc pipe that use these fittings is measured from the inside THESE GO OVER THE OUT SIDE OF THE PVC HENSE THE CORRECT MEASUREMENTS FOR THIS APPLICATION ----very easy assembly--or return them and try a different size,if yours is different than mine.

4.6/5

Product ID: 73860393

Secure Transaction

12 interest-free installments with tabby

💨20% more efficient

🔧DIY customizable

🧹99.9% dust capture

Frequently Bought Together

Oneida Air Systems Dust Deputy DIY Anti-Static Retrofit Cyclone Separator for Wet/Dry Shop Vacuums (DD DIY)

Cen-Tec Systems 94698 Quick Click 10 Ft. Hose for Home and Shop Vacuums with Expanded Multi-Brand Power Tool Adapter Set for Dust Collection

Automatic Vacuum Switch, Ortis Vacuum Switch for More Power Tools, Delay Vacuum On/Off to Prevent Circuit Overload and Tripping, Keep Your Workplace Cleaner, Better for Your Lung

Description

🛠️ Build Your Dust-Free Dream!

DUST FREE ZONE - Capture up to 99.9% of dust and debris before it clogs your vacuum filter.
MADE IN AMERICA - Craft your own dust control system with our DIY cyclone—your imagination is the limit!
LONGER FILTER LIFESPAN - Reduce filter cleanings and save money on replacements with our innovative design.
VERSATILE COMPATIBILITY - Easily adapts to any wet/dry vacuum, handling a variety of materials effortlessly.
UNLEASH THE POWER OF CLEAN - Experience 20% more suction efficiency with patented Neutral Vane Technology!

The Dust Deputy DIY Anti-Static Retrofit Cyclone Separator enhances your wet/dry vacuum's performance by capturing up to 99.9% of dust and debris, prolonging filter life and reducing maintenance costs. With its versatile design, it fits any vacuum model and allows for a customizable dust control system, all while being proudly made in America.

Specifications

Brand	Oneida Air Systems
Model	AXD001004
Product Dimensions	39.37 x 23.62 x 18.8 cm; 22.68 g
Part Number	AXD001004
Colour	_
Certification	certified frustration-free
Material Type	Plastic, Resin
Included Components	Dust Deputy DIY Anti-Static Retrofit Cyclone
Batteries included?	No
Batteries Required?	No
Item Weight	22.7 g

Have a Question? See What Others Asked

anybody put this on 30 gallon steel buckets? the galvanized ones for storing animal food and such?

Is the flange at the base a standard size with a standard bolt pattern? If not, could I get the ID and OD dimensions?

Will this work for wet pickup? Will it separate water from the airflow using a high-flow (approximately 210 CFM) shop vac?

What is the size of the entry and exit ports?

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Farhan Q.

The delivery time was excellent, and the packaging was secure.

2 months ago

Suresh K.

Very impressed with the quality and fast delivery. Will shop here again.

4 days ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving over 300 million shoppers across more than 200 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

AED 342

Duties & taxes incl.

UAEstore

Free Shipping

with PRO Membership

Delivery Partners: iMile, Transcorp

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

12 interest-free installments with tabby

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ayesha M.

The product exactly matches the description. Very satisfied with my purchase.

5 days ago

Anjali K.

The product quality is outstanding. Exactly what I needed for my work.

1 month ago

View all Trustpilot reviews